-
NaturaLED led-fxhbl300-44fr-850 300w LED Linear Highbay 5000K
SKU: LED-FXHBL300-44FR-850Brightness 39472 LumensFixture Wattage 300 WattPower Factor 0.9+Dimensions 16" W x 44" HAverage life 50000 hrsTechnology LEDHID Equivalent 1000-1250 WattOperating Temperature -22°F to 122°FVoltage 120-277V ou 277-480V$377.99 -
Arani HB-300W-50K-DS-347V 300W LED High Bay Light 5000K
SKU: HB-300W-50K-DS-347VBrightness 42000 LumensFixture Wattage 300 WattAverage life 50000 hrsTechnology LEDHID Equivalent 1000 WattOperating Temperature -40°c to 50°cVoltage 347VDimmable DimmableIP Rating IP65$417.99 -
Eiko HBX2-3004-2 Matte Black 300W Monopoint Highbay 4000K
SKU: HBX2-3004-2Ordering Code 800733Structure Finish Matte BlackBrightness 45526 LumensFixture Wattage 300 WattAverage life >54000 hrsTechnology LEDHID Equivalent 1000 WattOperating Temperature -40°C to 55°CVoltage 277-480V$645.99 -
Luxwerx Industrial LED Lamp 300W HP3CO-30LS-R380
SKU: HP3CO-30LS-R380Brightness 39,000 LumensFixture Wattage 300Dimensions 380mm (length) x 206mm (height)Voltage 100-277V / 347V / 480Vlumens per watt 130Dimmable DimmableIP Rating IP65CRI 80+Certifications UL/CSA Listed,DLC ListedOut of stock
-
Orion Lighting WTLED2 Apollo Wet Listed Enclosed LED Highbay
SKU: WTLED2Dimensions W: 13.50"Length 40.90"Average life 125,000 hrsDimmable Dimmable / Non-DimmableIP Rating IP65Certifications DLC Listed, UL/CSA ListedSafety Rated Wet LocationWarranty 5 Years WarrantyOut of stock
-
Lithonia Lighting IBZ-T5-454-WD-HV-CS93W 4-Lamps 54W Linear Fluorescent High Bay, T5HO
SKU: IBZ-T5-454-WD-HV-CS93WLamp Type T5Brightness 2500 lumensFixture Wattage 54 WattDimensions 48" x 13"Length 4'Ceiling Height 15-40'Number of Bulbs 4Technology FluorescentOperating Temperature 68°COut of stock
-
Elite CB2-LED Architectural LED High Bay
SKU: CB2-LEDMounting Suspended MountFixture Wattage 64/91/139/184/215/276/328/440 WattAverage life 70000 hrsTechnology LEDDimmable DimmableCRI 85+Certifications DLC Listed,T24, UL/CSA ListedSafety Rated Damp LocationWarranty 5 Years WarrantyOut of stock
-
Delviro Energy titan-hb-c Linear highbay
SKU: titan-hb-cControl Option 0-10V Dimming | WIFI | Occupancy Sensor | Bi-Level DimmingDimensions W 6.654” x H 4.81”Average life 200,000 hrsOperating Temperature ( -25°C to +40°) | ( -25°C to +55°)Dimmable DimmableCRI 86Certifications DLC Listed, cULusSafety Rated Dry/Damp LocationWarranty 10 Years WarrantyOut of stock
-
Lithonia Lighting IBZ-T5-654-HV-CS93W 6-Lamps 54W Linear Fluorescent High Bay, T5HO
SKU: IBZ-T5-654-HV-CS93WLamp Type T5Brightness 2500 lumensFixture Wattage 54 WattDimensions 48" x 18"Length 4'Ceiling Height 15-40'Number of Bulbs 6Technology FluorescentOperating Temperature 68°COut of stock
-
Eralux AE-IL-TR Matt White LED Rectangular High bay
SKU: AE-IL-TRStructure Finish Matt WhiteMounting Suspended MountBrightness 11250, 15000, 22500, 30000, 36000, 45000, 60000 LumensFixture Wattage 75 Watt -400 WattAverage life 100000 hrsTechnology LEDOperating Temperature -40 to 45°CVoltage 120-277V, 347-480VDimmable DimmableOut of stock
Shop Confidently // secure transactions with ssl encryption
About High bay lighting
High bay lighting is designed to operate high above the ground, which makes it a popular option for commercial and industrial buildings. High bay fixtures are commonly found in places like warehouses, manufacturing plants, industrial garages and large stores. When a building has a ceiling height of over 15 feet, other fixtures don’t provide adequate lighting at floor level - you need to use high bay lamps.
Most high bay fixtures use high-output fluorescent tubes, metal halide bulbs or LED lamps. However, LED high bay lights offer the best performance: they last longer than both fluorescent and MH lamps, and they can achieve energy savings of over 60%. For example, when upgrading metal halide lamps, a 400W equivalent LED high bay typically consumes less than 150W. Since the MH fixture consumes around 450W when connected to the ballast, you’re getting energy savings of 66% in this case.
Thanks to their long service life, High bay LED lights also save on replacement lamps and maintenance over time. While an MH bulb must normally be replaced in less than 10,000 hours, an LED high bay light will normally last between 50,000 and 100,000 hours. In other words, you are not only saving electricity, but also 5-10 replacement lamps over time!
High bay LED lights are also a safer option than fluorescent tubes and MH bulbs:
- Fluorescent tubes and MH bulbs can shatter, releasing shards of glass over the area below. This can be very dangerous on a factory floor, or a warehouse that contains food products. On the other hand, LED high bay lights can be manufactured without fragile materials, eliminating this risk.
- MH bulbs cannot be switched back on immediately if their power supply is disconnected, leaving the area in the dark for several minutes. This is not an issue when using LED lighting, which can be switched frequently without problem.
- Thanks to their low energy consumption, LED lights can run with batteries and other backup power sources for a longer time when there is a blackout. Fluorescent tubes and MH lamps will deplete backup power sources faster, due to their higher consumption.
If you want to improve high bay lighting in an existing building, there are two main options. You can remove the existing lighting system completely to install new LED fixtures, but you can also install high bay LED retrofit lamps. which use existing fixtures while only replacing their lamps and internal connections.
Below, we will answer some frequently asked questions about LED high bay lights, and high bay lighting in general. If you’re looking for quality LED high bay lights in Canada, Lumenco offers a wide production selection from top brands in the lighting industry.
Are There Different Types of LED High Bay Lights?
All high bay LED fixtures are designed to provide adequate lighting when installed high above the ground. However, there are different designs available:
- Linear high bay LED fixtures
- UFO high bay fixtures, also known as round LED high bays
- Vapor tight high bay LED fixtures
- Architectural high bay LED fixtures
- Grid-mount high bay LED fixtures
Linear and UFO fixtures are the most common types, and both are very effective when you need to illuminate areas with high ceilings. The main difference between these fixtures types is their beam shape: linear high bay LED fixtures emit more light towards their sides, making them suitable for aisles, while UFO fixtures emit light equally in all directions due to their round shape.
High bay LED fixtures are an excellent option for industrial lighting. Lamp replacements can be disruptive or production in a manufacturing plant, but they are minimized thanks to the long service life of LED lighting.
How Are High Bay Fixtures Installed?
When high bay fixtures are used in commercial and industrial buildings, they are normally attached to the ceiling with specially designed chains, similar to how shop lights are installed. However, there are also surface mount LED high bay fixtures, which can be attached directly to the roof structure without chains.
If you are using LED high bay retrofit lamps, there is no need to install new fixtures. You only need to remove the lamps in the existing fixtures, and rewire their internal connections as required by the retrofit lamps. This allows a quicker installation while saving on labor costs.
Are High Bay Fixtures Compatible with Lighting Controls?
When using high bay fixtures, the compatibility with lighting controls depends on the lamp type:
- High bay LED fixtures are the best option to be combined with automatic lighting controls. They can be switched on and off in a short time without problem, and they can also be dimmed when their full lighting output is not needed.
- High bay fluorescent fixtures can be switched on and off with lighting controls, but most of them are not compatible with dimmers - you need special lamps and ballasts.
- High bay MH fixtures cannot be switched on and off repeatedly, since they have a restrike time, and you cannot use dimmers with them. Lighting controls have very limited applications in this case.
Lighting controls can achieve synergy with LED high bay fixtures, increasing their energy savings. For example, a 400 watt metal halide high bay LED equivalent bulb only consumes around 150W. To achieve additional savings, a lighting control can reduce its operating hours, and also its brightness when daylight is available.
How Often Do High Bay Lamps Need to Be Replaced?
When using high bay lighting, the frequency of replacement depends on the lamp type:
- Metal halide lamps have the shortest service life, and normally they must be replaced in less than 10,000 hours.
- Fluorescent tubes have an intermediate service life of around 20,000 hours.
- LED lamps have the longest service life: replacement bulbs normally last more than 50,000 hours, and high bay fixtures with integrated LEDs have a service life of up to 100,000 hours.
High bay LED lamps produce less waste thanks to their long service life, making them an environmentally friendly alternative. Also consider that LED lamps contain no mercury, unlike metal halide and fluorescent tubes.